# petchemical.com


## Posts

- [Hello world!](https://petchemical.com/hello-world/): Welcome to WordPress. This is your first post. Edit or delete it, then start writing!

## Pages

- [TDS 1.11 of 2-Methyl-1,3-propanediol](https://petchemical.com/tds-1-11-of-2-methyl-13-propanediol/)
- [TDS 1.10 of 1,4-Butanediol](https://petchemical.com/tds-1-10-of-14-butanediol/)
- [TDS 1.9 of Dimethyl Terephthalate (DMT)](https://petchemical.com/tds-1-9-of-dimethyl-terephthalate-dmt/)
- [TDS 1.8 of 1,2-Propylene Glycol (PG)](https://petchemical.com/tds-1-8-of-12-propylene-glycol-pg/)
- [TDS 1.7 of Triethylene Glycol (TEG)](https://petchemical.com/tds-1-7-of-triethylene-glycol-teg/)
- [TDS 1.6 of Diethylene Glycol (DEG)](https://petchemical.com/tds-1-6-of-diethylene-glycol-deg/)
- [TDS 1.5 of Monoethylene Glycol (MEG)](https://petchemical.com/tds-1-5-of-monoethylene-glycol-meg/)
- [TDS 1.4 of Neopentyl Glycol (NPG)](https://petchemical.com/tds-1-4-of-neopentyl-glycol-npg/)
- [TDS 1.3 of Adipic Acid](https://petchemical.com/tds-1-3-of-adipic-acid/)
- [TDS 1.2 of Isophthalic Acid (IPA) (1.2)](https://petchemical.com/tds-1-2-of-isophthalic-acid-ipa-1-2/)
- [1.1 Purified Terephthalic Acid](https://petchemical.com/1-1-purified-terephthalic-acid/)
- [Product Page New](https://petchemical.com/product-page-new/)
- [Biodegradable polyester](https://petchemical.com/biodegradable-polyester/)
- [TDS (Technical Data Sheet) for   PBS Resin](https://petchemical.com/tds-technical-data-sheet-for-pbs-resin/): TDS (Technical Data Sheet) for   PBS Resin General Information Typical Properties of PBS Test Item Unit Value Density (25℃) g/cm³ 1.25±0.03 Melting Point ℃ 105‑116 Melt Flow Rate g/10min ≤10; 10‑20; 20‑40 Moisture Content % ≤0.1 Color L Value — ≥75 Color A Value — ≤5 Color B Value — ≤10 Ash % ≤0.1 Carboxyl […]
- [TDS (Technical Data Sheet) for   PBAT Resin](https://petchemical.com/tds-technical-data-sheet-for-pbat-resin/): TDS (Technical Data Sheet) for   PBAT Resin General Information Typical Properties of PBAT Test Item Unit Value Density (25℃) g/cm³ 1.23±0.03 Melting Point ℃ 113‑123 Melt Flow Rate g/10min ≤5 Moisture Content % ≤0.1 Color L Value — ≥70 Color A Value — ≤5 Color B Value — ≤10 Ash % ≤0.1 Carboxyl End Groups […]
- [TDS for  Modified PBT Resins](https://petchemical.com/tds-for-modified-pbt-resins/): TDS for  Modified PBT Resins General Information Typical Properties 1. KHBTT1100 (Toughened PBT) Test Item Test Standard Unit Value Density ISO 1183 g/cm³ 1.30 Moulding Shrinkage (Parallel) ISO 294 % 0.8‑2.3 Moulding Shrinkage (Normal) ISO 294 % 1.2‑2.3 Saturated Water Absorption ISO 62 % 0.2 Tensile Strength (10mm/min) ISO 527 MPa 60 Elongation at Break […]
- [TDS of  SSP‑Grade PBT Resin](https://petchemical.com/tds-of-ssp-grade-pbt-resin/): TDS of  SSP‑Grade PBT Resin General Information Grade‑wise Typical Properties KH2110P Item Test Method Unit Value Intrinsic Viscosity — dL/g 1.070±0.025 Carboxyl End Groups — mol/t ≤15 Color L Value GB/T 14190 — ≥92 Color B Value GB/T 14190 — ≤4.0 Tetrahydrofuran KHS 001 mg/kg ≤30 MFR (235℃/2.16kg) ISO 1133 g/10min 12.0±3.0 MFR (250℃/2.16kg) ISO […]
- [TDS (Technical Data Sheet) for PBT resin](https://petchemical.com/tds-technical-data-sheet-for-pbt-resin/): TDS (Technical Data Sheet) for PBT resin General Information Typical Properties of Each Grade 1. KH2075 Item Test Method Unit Value Chemical Properties       Intrinsic Viscosity — dL/g 0.725±0.012 Carboxyl End Groups — mol/t 14.0±4.0 Color L Value GB/T 14190 — ≥95 Color B Value GB/T 14190 — 2.0±1.0 Moisture Absorption — % […]
- [14. PBT RESIN](https://petchemical.com/14-pbt-resin/)
- [Blog](https://petchemical.com/blog/)
- [contact information](https://petchemical.com/contact-information/): We Are Ready to Support Your Business Orient International is committed to providing efficient communication, professional customer support, and reliable international trade services for global industrial customers. Contact Information Connect with our international sales and support team for product inquiries, quotations, technical assistance, and global PET chemical supply solutions. For IndiaSabbir Ahmed Call/Whatsapp: 18923322592 Email: […]
- [13. Hot-melt High Molecular Weight Saturated Polyester Resin for Hot-melt Adhesives](https://petchemical.com/13-hot-melt-high-molecular-weight-saturated-polyester-resin-for-hot-melt-adhesives/)
- [12. Water-based High Molecular Weight Saturated Polyester Resin for Water-based Inks & Water-based Adhesives](https://petchemical.com/12-water-based-high-molecular-weight-saturated-polyester-resin-for-water-based-inks-water-based-adhesives/)
- [11. Solvent-based High Molecular Weight Saturated Polyester Resin for Inks & Adhesives](https://petchemical.com/11-solvent-based-high-molecular-weight-saturated-polyester-resin-for-inks-adhesives/)
- [10. Solvent-based High Molecular Weight Saturated Polyester Resin for Coil/Printed Iron Coatings](https://petchemical.com/10-solvent-based-high-molecular-weight-saturated-polyester-resin-for-coil-printed-iron-coatings/)
- [contact us](https://petchemical.com/contact-us/): Send Us Your Inquiry Please fill out the form below and our international sales team will contact you within 24 hours. Why Work With Us Global PET Chemical Solutions Orient International specializes in supplying high-quality PET raw materials, catalysts, additives, bio-based materials, and functional PET chips for global industrial applications.
- [Functional PET Chip](https://petchemical.com/functional-pet-chip/)
- [8. Chemically Recycled PET (rPET)](https://petchemical.com/8-chemically-recycled-pet-rpet/)
- [7. Mechanical Recycled PET Chip](https://petchemical.com/7-mechanical-recycled-pet-chip/)
- [Bio-based Chip](https://petchemical.com/bio-based-chip/)
- [PET M/B Chip](https://petchemical.com/pet-m-b-chip/)
- [5. PET M/B Chip](https://petchemical.com/5-pet-m-b-chip/)
- [4. Bio-based PET Raw Material](https://petchemical.com/4-bio-based-pet-raw-material/)
- [3.PET Additives, Auxiliaries](https://petchemical.com/3-pet-additives-auxiliaries/)
- [2. PET Catalysts](https://petchemical.com/2-pet-catalysts/)
- [1. PET Base Raw Materials](https://petchemical.com/1-pet-base-raw-materials/)
- [Products](https://petchemical.com/products/): Looking for PET Chemical Products?
- [about Us](https://petchemical.com/about-us/)
- [Customer Cabinet](https://petchemical.com/customer-cabinet-2/)
- [Home](https://petchemical.com/)
- [Shop](https://petchemical.com/shop/)
- [Customer Cabinet](https://petchemical.com/customer-cabinet/)
- [TDS 15.2 of PBS](https://petchemical.com/tds-15-2-of-pbs/): TDS (Technical Data Sheet) for   PBS Resin General Information Typical Properties of PBS Test Item Unit Value Density (25℃) g/cm³ 1.25±0.03 Melting Point ℃ 105‑116 Melt Flow Rate g/10min ≤10; 10‑20; 20‑40 Moisture Content % ≤0.1 Color L Value — ≥75 Color A Value — ≤5 Color B Value — ≤10 Ash % ≤0.1 Carboxyl End Groups mol/t ≤50 Tensile Strength MPa ≥25 Break Elongation % ≥150 Flexural Strength MPa ≥25 Flexural Modulus MPa ≥400
- [TDS 15.1 of PBAT](https://petchemical.com/tds-15-1-of-pbat/): TDS (Technical Data Sheet) for   PBAT Resin General Information Typical Properties of PBAT Test Item Unit Value Density (25℃) g/cm³ 1.23±0.03 Melting Point ℃ 113‑123 Melt Flow Rate g/10min ≤5 Moisture Content % ≤0.1 Color L Value — ≥70 Color A Value — ≤5 Color B Value — ≤10 Ash % ≤0.1 Carboxyl End Groups mol/t ≤25 Tensile Strength MPa ≥15 Break Elongation % ≥500 Flexural Strength MPa ≥3 Flexural Modulus MPa ≥30 Vicat Softening Point (A₅₀) ℃ 88±2
- [TDS 14.3 of modified PBT](https://petchemical.com/tds-14-3-of-modified-pbt/): TDS for  Modified PBT Resins General Information Typical Properties 1. KHBTT1100 (Toughened PBT) Test Item Test Standard Unit Value Density ISO 1183 g/cm³ 1.30 Moulding Shrinkage (Parallel) ISO 294 % 0.8‑2.3 Moulding Shrinkage (Normal) ISO 294 % 1.2‑2.3 Saturated Water Absorption ISO 62 % 0.2 Tensile Strength (10mm/min) ISO 527 MPa 60 Elongation at Break (10mm/min) ISO 527 % 18.0 Flexural Strength (2mm/min) ISO 178 MPa 75 Flexural Modulus (2mm/min) ISO 178 MPa 2200 Notched Impact Strength ISO 179 kJ/m² 6 Unnotched Impact Strength ISO 179 kJ/m² Non‑break Heat Deflection Temp. (1.82MPa) ISO 75 ℃ 60 Flammability UL94 Class HB […]
- [TDS 14.2 of SSP PBT](https://petchemical.com/tds-14-2-of-ssp-pbt/): TDS of  SSP‑Grade PBT Resin General Information Grade‑wise Typical Properties KH2110P Item Test Method Unit Value Intrinsic Viscosity — dL/g 1.070±0.025 Carboxyl End Groups — mol/t ≤15 Color L Value GB/T 14190 — ≥92 Color B Value GB/T 14190 — ≤4.0 Tetrahydrofuran KHS 001 mg/kg ≤30 MFR (235℃/2.16kg) ISO 1133 g/10min 12.0±3.0 MFR (250℃/2.16kg) ISO 1133 g/10min 20.0±3.0 Tensile Strength (50mm/min) ISO 527 MPa ≥50 Break Elongation ISO 527 % ≥150 Flexural Strength ISO 178 MPa ≥60 IZOD Notched Impact Strength ISO 180 kJ/m² ≥6.0 KHS2110 Item Test Method Unit Value Intrinsic Viscosity — dL/g 1.100±0.025 Carboxyl End Groups — […]
- [TDS 14.1 of PBT resin](https://petchemical.com/tds-14-1-of-pbt-resin/): TDS (Technical Data Sheet) for PBT resin General Information Typical Properties of Each Grade 1. KH2075 Item Test Method Unit Value Chemical Properties       Intrinsic Viscosity — dL/g 0.725±0.012 Carboxyl End Groups — mol/t 14.0±4.0 Color L Value GB/T 14190 — ≥95 Color B Value GB/T 14190 — 2.0±1.0 Moisture Absorption — % ≤0.2 Physical Properties       Density KHS 001 g/cm³ 1.30‑1.32 MFR (235℃/2.16kg) ISO 1133 g/10min 87.0±8.0 MFR (250℃/2.16kg) ISO 1133 g/10min 125±10.0 Tensile Strength (50mm/min) ISO 527 MPa ≥50 Break Elongation ISO 527 % ≥20 Flexural Strength ISO 178 MPa ≥70 IZOD Notched Impact […]
- [TDS 13.2 of YT-808W for Hot-melt adhesives](https://petchemical.com/tds-13-2-of-yt-808w-for-hot-melt-adhesives/): Technical Data Sheet Hot-Melt Saturated Polyester Resin – YT-808W 1. Product Identification Item Details Product Name Hot-Melt Saturated Polyester Resin (YT-808W) CAS No. 25135-73-3 Appearance Granular Solid Application Low-temperature resistant hot-melt adhesives for automotive, wood and filter applications 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 20000 Glass Transition Temperature (Tg) °C -10 Melting Point °C 140 Melt Flow Index (160°C/2.16kg) g/10min 45   3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and […]
- [TDS 13.1 of YT-508W for PVC, ABS hot-melt adhesives](https://petchemical.com/tds-13-1-of-yt-508w-for-pvc-abs-hot-melt-adhesives/): Technical Data Sheet Hot-Melt Saturated Polyester Resin – YT-508W 1. Product Identification Item Details Product Name Hot-Melt Saturated Polyester Resin (YT-508W) CAS No. 25135-73-3 Appearance Granular Solid Application Hot-melt adhesive for PVC, ABS, wood board, automotive interior, filter assembly 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 20000 Glass Transition Temperature (Tg) °C 22 Melting Point °C 140 Melt Flow Index (160°C/2.16kg) g/10min 35 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and […]
- [TDS 12.2 of YT-170S for Paper. film surface pretreatment layers, water-based adhesives](https://petchemical.com/tds-12-2-of-yt-170s-for-paper-film-surface-pretreatment-layers-water-based-adhesives/): Technical Data Sheet Waterborne Saturated Polyester Resin – YT-170S 1. Product Identification Item Details Product Name Waterborne Saturated Polyester Resin (YT-170S) CAS No. 25135-73-3 Appearance Granular Solid Application Paper/film surface pretreatment layer, water-based adhesive 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 13000 Glass Transition Temperature (Tg) °C 45 Melting Point °C 166 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible chemicals. […]
- [TDS 12.1 of YT-120S for Paper，film surface pretreatment layers, water-based adhesives](https://petchemical.com/tds-12-1-of-yt-120s-for-paper%ef%bc%8cfilm-surface-pretreatment-layers-water-based-adhesives/): Technical Data Sheet Waterborne Saturated Polyester Resin – YT-120S 1. Product Identification Item Details Product Name Waterborne Saturated Polyester Resin (YT-120S) CAS No. 25135-73-3 Appearance Granular Solid Application Paper/film surface pretreatment layer, water-based adhesive 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 13000 Glass Transition Temperature (Tg) °C 58 Melting Point °C 166 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible chemicals. […]
- [TDS 11.6 of YT-290H for Inks, industrial adhesives](https://petchemical.com/tds-11-6-of-yt-290h-for-inks-industrial-adhesives/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-290H 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-290H) CAS No. 25135-73-3 Appearance Block Solid Application Ink, industrial adhesive 2. Typical Specifications Item Unit Value Form – Block Number Average Molecular Weight (Mn) – 7500 Weight Average Molecular Weight (Mw) – 15000 Glass Transition Temperature (Tg) °C 18 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 20–25 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible chemicals. […]
- [TDS 11.5 of YT-220H for Inks, industrial adhesives](https://petchemical.com/tds-11-5-of-yt-220h-for-inks-industrial-adhesives/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-220H 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-220H) CAS No. 25135-73-3 Appearance Block Solid Application Ink, industrial adhesive 2. Typical Specifications Item Unit Value Form – Block Number Average Molecular Weight (Mn) – 8000 Weight Average Molecular Weight (Mw) – 15000 Glass Transition Temperature (Tg) °C 22 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 20–25 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible chemicals. […]
- [TDS 11.4 of YT-880 for PET inks, industrial adhesives](https://petchemical.com/tds-11-4-of-yt-880-for-pet-inks-industrial-adhesives/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-880 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-880) CAS No. 25135-73-3 Appearance Granular Solid Application PET ink, industrial adhesive 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 18000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 67 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 8–10 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible […]
- [TDS 11.3 of YT-816 for Screen inks, PET film primer](https://petchemical.com/tds-11-3-of-yt-816-for-screen-inks-pet-film-primer/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-816 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-816) CAS No. 25135-73-3 Appearance Granular Solid Application Screen printing ink, PET film pre-coating 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 18000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 50 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature […]
- [TDS 11.2 of YT-812 for Screen，offset inks, thermal transfer ribbons, FFC](https://petchemical.com/tds-11-2-of-yt-812-for-screen%ef%bc%8coffset-inks-thermal-transfer-ribbons-ffc/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-812 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-812) CAS No. 25135-73-3 Appearance Granular Solid Application Screen printing / gravure ink, thermal transfer ribbon, FFC (Flexible Flat Cable) 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 28000 Weight Average Molecular Weight (Mw) – 45000 Glass Transition Temperature (Tg) °C 70 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. […]
- [TDS 11.1 of YT-801 for Screen，offset inks, hot melt adhesives, PET film composite adhesives](https://petchemical.com/tds-11-1-of-yt-801-for-screen%ef%bc%8coffset-inks-hot-melt-adhesives-pet-film-composite-adhesives/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin – YT-801 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-801) CAS No. 25135-73-3 Appearance Granular Solid Application Screen printing / gravure ink, heat-seal adhesive, PET film lamination adhesive 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 21000 Weight Average Molecular Weight (Mw) – 36000 Glass Transition Temperature (Tg) °C 67 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizable Storage: Store in a cool, dry and well-ventilated area. Keep […]
- [TDS 10.8 of YT-218H for Coil,printing iron coatings, topcoats, gloss oils](https://petchemical.com/tds-10-8-of-yt-218h-for-coilprinting-iron-coatings-topcoats-gloss-oils/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-218H 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-218H) CAS No. 25135-73-3 Appearance Block Solid Application Coil coating, tinplate printing, topcoat and clear coat 2. Typical Specifications Item Unit Value Form – Block Number Average Molecular Weight (Mn) – 13000 Weight Average Molecular Weight (Mw) – 22000 Glass Transition Temperature (Tg) °C 35 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 10–12 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg package, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature […]
- [TDS 10.7 of YT-790N for BPA-IN interior coatings, BPA-free double A 2 ,3-piece can coatings](https://petchemical.com/tds-10-7-of-yt-790n-for-bpa-in-interior-coatings-bpa-free-double-a-2-3-piece-can-coatings/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-790N 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-790N) CAS No. 25135-73-3 Appearance Granular Solid Application BPA-NI can coating, high scratch resistance food packaging coating 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 20000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 70 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 8–10 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high […]
- [TDS 10.6 of YT-770N for BPA-IN interior coatings, BPA-free Class A 2-piece can coatings](https://petchemical.com/tds-10-6-of-yt-770n-for-bpa-in-interior-coatings-bpa-free-class-a-2-piece-can-coatings/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-770N 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-770N) CAS No. 25135-73-3 Appearance Granular Solid Application BPA-NI food can coating, 2-piece & 3-piece can internal coating 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 20000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 70 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, […]
- [TDS 10.5 of YT-718N for BPA-IN interior coatings, alcohol-containing food contact, alternative to epoxy phenolic systems](https://petchemical.com/tds-10-5-of-yt-718n-for-bpa-in-interior-coatings-alcohol-containing-food-contact-alternative-to-epoxy-phenolic-systems/): Technical Data Sheet  Solvent-Borne Saturated Polyester Resin YT-718N 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-718N) CAS No. 25135-73-3 Appearance Granular Solid Application BPA-NI can internal coating, alcohol food contact coating, substitute for epoxy phenolic resin 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 20000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 56 Acid Value mgKOH/g < 3 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep […]
- [TDS 10.4 of YT-6028 for Coil printing iron coatings, color coating plates, decorative coatings](https://petchemical.com/tds-10-4-of-yt-6028-for-coil-printing-iron-coatings-color-coating-plates-decorative-coatings/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-6028 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-6028) CAS No. 25135-73-3 Appearance Granular Solid Application Coil coating, color-coated plate, tinplate printing, decorative coating 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 23000 Weight Average Molecular Weight (Mw) – 38000 Glass Transition Temperature (Tg) °C 70 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature […]
- [TDS 10.3 of YT-6026 for Coil printing coatings](https://petchemical.com/tds-10-3-of-yt-6026-for-coil-printing-coatings/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-6026 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-6026) CAS No. 25135-73-3 Appearance Granular Solid Application Coil coating, tinplate printing coating 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 18000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 70 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 3–6   3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature and incompatible […]
- [TDS 10.2 of YT-6023 for Coil printing coatings, primers, gloss oils](https://petchemical.com/tds-10-2-of-yt-6023-for-coil-printing-coatings-primers-gloss-oils/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-6023 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-6023) CAS No. 25135-73-3 Appearance Granular Solid Application Coil coating, tinplate printing coating, primer and topcoat 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 18000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 49 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature […]
- [TDS 10.1 of YT-6021 for Coil printing coatings, primers, gloss oils](https://petchemical.com/tds-10-1-of-yt-6021-for-coil-printing-coatings-primers-gloss-oils/): Technical Data Sheet Solvent-Borne Saturated Polyester Resin YT-6021 1. Product Identification Item Details Product Name Solvent-Borne Saturated Polyester Resin (YT-6021) CAS No. 25135-73-3 Appearance Granular Solid Application Coil coating, tinplate printing coating, primer and topcoat 2. Typical Specifications Item Unit Value Form – Granule Number Average Molecular Weight (Mn) – 18000 Weight Average Molecular Weight (Mw) – 30000 Glass Transition Temperature (Tg) °C 47 Acid Value mgKOH/g < 2 Hydroxyl Value mgKOH/g 3–6 3. Key Features 4. Applications 5. Packaging & Storage Packaging: 25kg bags, customizableStorage: Store in a cool, dry and well-ventilated area. Keep away from moisture, high temperature […]
- [TDS 9.10 of antimony-Free Low-Melting PET Chip for Hot-Melt Sheath-Core Fiber AF-LM180](https://petchemical.com/tds-9-10-of-antimony-free-low-melting-pet-chip-for-hot-melt-sheath-core-fiber-af-lm180/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name ntimony-Free Low-Melting PET Chip for Hot-Melt Sheath-Core Fiber AF-LM180 CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid chips Note Antimony-free, low-melting-point copolyester resin 2. Typical Specifications Serial No. Item Unit Specification 1 Intrinsic Viscosity dL/g 0.635 ± 0.012 2 Melting Point °C 180 ± 8 3 Diethylene Glycol (DEG) Content % 4.5 ± 0.1 4 Terminal Carboxyl Group mol/t ≤ 30 5 Color Value (L) – ≥ 50 6 Color Value (b) – ≤ 4.5 7 Moisture Content % ≤ 0.4 8 TiO₂ Content % 0.0 ± 0.01 9 […]
- [TDS 9.9 of Low-Melting PET Chip LM180](https://petchemical.com/tds-9-9-of-low-melting-pet-chip-lm180/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Low-Melting PET Chip LM180 CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid chips Note Low-melting-point copolyester resin 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity dl/g 0.635 ± 0.012 Melting Point °C 180 ± 8 Diethylene Glycol (DEG) Content % 4.5 ± 0.1 Carboxyl End Group mol/t ≤ 30 Color Value (L) – ≥ 50 Color Value (b) – ≤ 4.5 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 1000kg bags Storage Conditions: Store in a cool, dry, well-ventilated area. Protect from moisture, direct […]
- [TDS 9.8 of Low-Melting PET Chip LM140](https://petchemical.com/tds-9-8-of-low-melting-pet-chip-lm140/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Low-Melting PET Chip LM140 p CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid chips Note Low-melting-point copolyester resin 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity dl/g 0.60 ± 0.015 Melting Point °C 140 ± 8 Diethylene Glycol (DEG) Content % 6.5 ± 0.5 Carboxyl End Group mol/t ≤ 30 Color Value (L) – ≥ 50 Color Value (a) – ≤ -2 Color Value (b) – ≤ 4 Moisture Content % ≤ 0.4 3. Additional Notes Viscosity, melting point, and DEG content can be adjusted according to customer […]
- [TDS 9.7 of Low-Melting PET Chip LM110](https://petchemical.com/tds-9-7-of-low-melting-pet-chip-lm110/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Low-Melting PET Chip LM110 CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid chips Note Modified low-melting-point polyester resin 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity dl/g 0.63 ± 0.015 Melting Point °C 115 ± 10 Diethylene Glycol (DEG) Content % 11 ± 0.5 Carboxyl End Group mol/t ≤ 30 Color Value (L) – ≥ 50 Color Value (a) – ≤ -2 Color Value (b) – ≤ 4 Moisture Content % ≤ 0.4 3. Additional Notes 4. Physical & Chemical Properties 5. Applications 6. Packaging & Storage Packaging: […]
- [TDS 9.6 of PET Chip for Wig CR-8816](https://petchemical.com/tds-9-6-of-pet-chip-for-wig-cr-8816/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bottle-Grade PET Resin (CR-8816, for Synthetic Hair Applications) CAS No. 25038-59-9 (Polyethylene Terephthalate) Appearance Transparent crystalline PET chips Grade CR-8816 Note High transparency, low AA grade, suitable for bottle and synthetic hair fiber production 2. Typical Specifications (Standard Values) Characteristics Unit Value Test Method Test Equipment Intrinsic Viscosity (I.V.) dg/g 0.80 ± 0.02 ASTM D5225 VISCOTEK Y501 Acetaldehyde (AA) Content mg/kg ≤ 1.0 WN-B010-9013E AGILENT HEADSPACE Color b Value – ≤ 1.0 WN-B010-7136E X-RITE Color L Value – ≥ 80.0 WN-B010-7136E X-RITE Carboxyl (COOH) Content mol/t ≤ 35 WN-B010-7013E […]
- [TDS 9.5 of High Viscosity PET Chip SP-244](https://petchemical.com/tds-9-5-of-high-viscosity-pet-chip-sp-244/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bright Engineering Plastic Grade Polyester Chip (E-IV Type, Viscosity-Enhanced) SP-244 CAS No. 25038-59-9 (Polyethylene Terephthalate) Appearance Bright solid chips Note High-viscosity grade for engineering plastic applications 2. Typical Specifications   Analysis Item Unit Quality Index Typical Test Result Intrinsic Viscosity dl/g 1.070 ± 0.025 1.073 Melting Point °C 261 ± 2 261 Carboxyl End Group mol/t ≤ 30 17 Color (b Value) – 3 ± 2 3 Moisture Content % ≤ 0.4 0.1 Powder Content mg/kg ≤ 100 < 50 Diethylene Glycol (DEG) Content % ≤ 1.20 0.79 3. […]
- [TDS 9.4 of High Viscosity PET Chip SP-241](https://petchemical.com/tds-9-4-of-high-viscosity-pet-chip-sp-241/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bright Engineering Plastic Grade Polyester Chip (E-II Type, Viscosity-Enhanced) SP-241 CAS No. 25038-59-9 (Polyethylene Terephthalate) Appearance Bright solid chips Note Viscosity-enhanced grade for engineering plastic applications 2. Typical Specifications   Analysis Item Unit Quality Index Typical Test Result Intrinsic Viscosity dl/g 0.900 ± 0.025 0.897 Melting Point °C 261 ± 2 261 Carboxyl End Group mol/t ≤ 30 24 Color (b Value) – 2 ± 2 2 Moisture Content % ≤ 0.4 0.1 Powder Content mg/kg ≤ 100 < 50 Diethylene Glycol (DEG) Content % ≤ 1.20 0.81 3. […]
- [TDS 9.3 of Semi or Full Dull Flame Retardant PET Chip FR-1](https://petchemical.com/tds-9-3-of-semi-or-full-dull-flame-retardant-pet-chip-fr-1/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Semi/Full-Dull Flame Retardant Polyester Chip CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid semi/full-dull chips Note Flame retardant modified PET for textile applications 2. Typical Specifications (Standard Values) Analysis Item Unit Standard Specification Intrinsic Viscosity dl/g M₀ ± 0.015 (M₀=0.684, standard) Diethylene Glycol (DEG) % 1.5 ± 0.15 Carboxyl End Group mol/t ≤ 15 Melting Point °C ≥ 253 Color Value (L) – ≥ 51 Color Value (b) – 5 ± 1 Color Value (a) – ≤ -0.5 Titanium (Ti) Content % M₁ ± 0.01 (customizable, typical grades: 0.3%, […]
- [TDS 9.2 of Cationic Dyeable PET Chip CD-1](https://petchemical.com/tds-9-2-of-cationic-dyeable-pet-chip-cd-1/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Low-Temperature Easy-Dye Cationic Polyester Chip (Microthermal ECDP Chip) CD-1 CAS No. 25038-59-9 (Modified Polyethylene Terephthalate) Appearance Solid chips Note Designed for cationic dyeable applications 2. Typical Specifications Analysis Item Unit Premium Grade Standard Degraded Grade Standard Intrinsic Viscosity dl/g M₀ ± 0.015 M₀ ± 0.025 Diethylene Glycol (DEG) % 3.6 ± 0.15 3.6 ± 0.35 Carboxyl End Group mol/t ≤ 15 ≤ 15 Melting Point °C ≥ 242 ≥ 240 Color Value (L) – ≥ 50 ≥ 48 Color Value (b) – M₁ ± 2 M₁ ± 3 Color […]
- [TDS 9.1 of Sea Island Chip WD-1](https://petchemical.com/tds-9-1-of-sea-island-chip-wd-1/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name COPET Fiber Grade Alkali-Soluble Polyester Chip (Sea-Island Type) WD-1 CAS No. 25038-59-9 (Polyethylene Terephthalate, modified) Appearance Solid chips Note For sea-island fiber production 2. Typical Specifications (Based on Test Result) Analysis Item Unit Test Value Standard Specification Intrinsic Viscosity dl/g 0.705 M₀ ± 0.015 (M₀=0.70, standard) Diethylene Glycol (DEG) % 2.81 2.9 ± 0.15 Carboxyl End Group mol/t 14 ≤ 15 Melting Point °C 249 ≥ 244 Color Value (L) – 72 ≥ 65 Color Value (b) – 1.71 M₁ ± 2 (M₁=2, standard) Color Value (a) – -2.92 […]
- [TDS 8.2 Bright r-PET Chip SK-CR-BL](https://petchemical.com/tds-8-2-bright-r-pet-chip-sk-cr-bl/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bright r-PET Chip SK-CR-BL Grade Bottle-grade Recycled PET CAS No. 25038-59-9 (Polyethylene Terephthalate) Appearance Transparent crystalline PET chips Note Food-contact grade, based on recycled PET material 2. Typical Specifications (Standard Values) Analysis Item Unit Standard Value Basic Properties     Intrinsic Viscosity dl/g 0.80 ± 0.03 Carboxyl End Group eq/ton max. 35 Diethylene Glycol mol% max. 3.0 Density g/cm³ 1.40 ± 0.01 Bulk Density kg/m³ 920 ± 20 Chip Size g/100ea 1.5 ± 0.2 Thermal Properties     Melting Point °C 247.0 ± 3.0 Optical Properties     Color […]
- [TDS 8.1 Semi-dull r-PET Chip JR-C-SD-R](https://petchemical.com/tds-8-1-semi-dull-r-pet-chip-jr-c-sd-r/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Semi-dull r-PET Chip JR-C-SD-R   CAS No. 25038-59-9 (Polyethylene Terephthalate) Appearance Solid semi-dull chips 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Standard Specification Intrinsic Viscosity (IV, 3:2 solvent) dl/g 0.633 0.630 ± 0.012 Melting Point (MP) °C 261.1 261 ± 2 End Carboxyl (-COOH) mol/t 24.6 28 ± 4 End Methyl (-CH₃) mol/t 2.86 4 ± 3 Diethylene Glycol (DEG) % 0.648 0.67 ± 0.15 Color L – 67.5 68 ± 4 Color b – 7.4 7.0 ± 2 Moisture Content (H₂O) % 0.08 […]
- [TDS 7.4 of Recycled PET chips R14-WF](https://petchemical.com/tds-7-4-of-recycled-pet-chips-r14-wf/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name R14 WF Recycled Polyethylene Terephthalate Pellets Chemical Name Polyethylene Terephthalate (PET), 100% Post-Industrial Recycled Product Code R14 WF Appearance Cylindrical pellets 2. Typical Specifications Analysis Item Test Standard Unit WF-N (SSP) WF-G Color Visual – Natural Gray Chip Shape Visual – Cylindrical Cylindrical Colour L Value ASTM D6290 / ISO 18314-1 – 71.0±0.03 67.5±0.03 Colour a Value ASTM D6290 / ISO 18314-1 – -0.5±0.03 0.4±0.03 Colour b Value ASTM D6290 / ISO 18314-1 – 8.3±0.03 3.9±0.03 Intrinsic Viscosity ASTM D4603 / ISO 1628-5 dL/g 0.75±0.03 0.61±0.03 Melting Point ASTM […]
- [TDS 7.3 of Recycled PET chips R14-LSP](https://petchemical.com/tds-7-3-of-recycled-pet-chips-r14-lsp/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name R14 LSB Recycled Polyethylene Terephthalate Pellets Chemical Name Polyethylene Terephthalate (PET), 100% Recycled Product Code R14 LSB Appearance Cylindrical pellets in brown, black or green 2. Typical Specifications Analysis Item Test Standard Unit LSP-B (Brown) LSP-B (Black) LSP-G (Green) Color Visual Inspection – Brown Black Green Intrinsic Viscosity ASTM D4603 dL/g 0.67±0.02 0.62±0.02 0.67±0.02 Melting Point ASTM D3418 °C 250±5 250±5 250±5 Chip Size (Caliber) Caliber mm 3.8±0.2 3.8±0.2 3.8±0.2 Chip Shape Visual Inspection – Cylindrical Cylindrical Cylindrical Mesh Size ASTM E11 Mesh 200 200 200 Ash Content ASTM […]
- [TDS 7.2 of Recycled PET flakes R12-I](https://petchemical.com/tds-7-2-of-recycled-pet-flakes-r12-i/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name R12 I Recycled Polyethylene Terephthalate Flakes Chemical Name Polyethylene Terephthalate (PET), 100% Post-Consumer Recycled Product Code R12 I Appearance Mixed colour PET flakes (cost-effective blue bottle mix) 2. Typical Specifications Analysis Item Unit I-BW I-O I-BO Intrinsic Viscosity dL/g ≥ 0.73-0.82 0.73-0.82 0.73-0.82 Melting Point °C 255±5 255±5 255±5 Bulk Density g/mL ≥ 0.25-0.35 0.25-0.35 0.25-0.35 Moisture % 0.8-1.5 0.8-1.5 0.8-1.5 Malformed Flakes % ≤ 1 1 1 Metal Content ppm ≤ 20 20 20 Size mm 14-16 14-16 14-16 Labels ppm ≤ 20 20 20 Blue Flakes % […]
- [TDS 7.1 of Recycled PET flakes R12 VS](https://petchemical.com/tds-7-1-of-recycled-pet-flakes-r12-vs/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name R12 VS Recycled Polyethylene Terephthalate Flakes Chemical Name Polyethylene Terephthalate (PET), 100% Post-Consumer Recycled Product Code R12 VS Appearance Clear, clean PET flakes 2. Typical Specifications Analysis Item Unit VS-W VS-BW Intrinsic Viscosity dL/g 0.73-0.78 0.73-0.78 Melting Point °C 255±5 255±5 Colour L Value – 65±7 65±7 Colour b Value – -0.15±1.0 -0.15±1.0 Bulk Density g/mL 0.28-0.35 0.28-0.35 Moisture % 0.8-1.2 0.8-1.2 Conductivity W/m·°C ≤ 8 8 Malformed Flakes % ≤ 0.5 0.5 Metal Content ppm ≤ 5 5 Size mm 12-14 12-14 Labels ppm ≤ 5 5 Blue […]
- [TDS 6.9 of Bio-based PE Chip Bio-PE-L F181CT](https://petchemical.com/tds-6-9-of-bio-based-pe-chip-bio-pe-l-f181ct/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polyethylene Resin (Bio-PE-L F181CT) CAS No. 9002-88-4 (Polyethylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 0.8 ± 0.2 Density g/cm³ 0.920 ± 0.002 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, dry, well-ventilated area. Keep away from moisture, direct sunlight, and incompatible materials.Handling Precautions: Avoid dust inhalation. Use appropriate personal protective […]
- [TDS 6.8 of Bio-based PE Chip Bio-PE-L F202PN](https://petchemical.com/tds-6-8-of-bio-based-pe-chip-bio-pe-l-f202pn/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polyethylene Resin (Bio-PE-L F202PN) CAS No. 9002-88-4 (Polyethylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 1.9 ± 0.2 Density g/cm³ 0.920 ± 0.002 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, dry, well-ventilated area. Keep away from moisture, direct sunlight, and incompatible materials.Handling Precautions: Avoid dust inhalation. Use appropriate personal protective […]
- [TDS 6.7 of Bio-based Polypropylene Random Copolymer Resin (Bio-PPR-MT11)](https://petchemical.com/tds-6-7-of-bio-based-polypropylene-random-copolymer-resin-bio-ppr-mt11/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polypropylene Random Copolymer Resin (Bio-PPR-MT11) CAS No. 9003-07-0 (Polypropylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 11 ± 2 Isotacticity % – Tensile Yield Stress MPa – Tensile Breaking Stress MPa – Nominal Tensile Strain at Break % – Tensile Modulus of Elasticity MPa – 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in […]
- [TDS 6.6 of Bio-based Polypropylene Resin (Bio-PPH-M11)](https://petchemical.com/tds-6-6-of-bio-based-polypropylene-resin-bio-pph-m11-2/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polypropylene Resin (Bio-PPH-M11) CAS No. 9003-07-0 (Polypropylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 11 ± 2 Isotacticity % – Tensile Yield Stress MPa – Tensile Breaking Stress MPa – Nominal Tensile Strain at Break % – Tensile Modulus of Elasticity MPa – 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, […]
- [TDS 6.6 of Bio-based Polypropylene Resin (Bio-PPH-M11)](https://petchemical.com/tds-6-6-of-bio-based-polypropylene-resin-bio-pph-m11/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polypropylene Resin (Bio-PPH-M11) CAS No. 9003-07-0 (Polypropylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 11 ± 2 Isotacticity % – Tensile Yield Stress MPa – Tensile Breaking Stress MPa – Nominal Tensile Strain at Break % – Tensile Modulus of Elasticity MPa – 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, […]
- [TDS 6.5 of Bio-based PP Chip Bio-PPH-Y40](https://petchemical.com/tds-6-5-of-bio-based-pp-chip-bio-pph-y40/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polypropylene Resin (Bio-PPH-Y40) CAS No. 9003-07-0 (Polypropylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 39.7 Isotacticity % 97.5 Tensile Yield Stress MPa 32.6 Tensile Breaking Stress MPa 17.1 Nominal Tensile Strain at Break % 592 Tensile Modulus of Elasticity MPa 1361 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, dry, well-ventilated […]
- [TDS 6.4 of Bio-based PP Chip Bio-PPH-T03](https://petchemical.com/tds-6-4-of-bio-based-pp-chip-bio-pph-t03/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based Polypropylene Resin (Bio-PPH-T03) CAS No. 9003-07-0 (Polypropylene) Appearance Solid pellets Note ISCC certified, sample available upon request 2. Typical Specifications   Analysis Item Unit Typical Value Melt Flow Rate (230℃, 2.16kg) g/10min 3.0 ± 0.5 Isotacticity % 98.2 Tensile Yield Stress MPa 32.1 Tensile Breaking Stress MPa 22.6 Nominal Tensile Strain at Break % 530 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage Packaging: 25kg bags or bulk (customizable upon request)Storage Conditions: Store in a cool, dry, well-ventilated area. Keep away from moisture, direct sunlight, […]
- [TDS 6.3 of Bio-based PFE CHIP](https://petchemical.com/tds-6-3-of-bio-based-pfe-chip/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Polyethylene 2,5-furandicarboxylate (PEF) CAS No. 28777-45-9 Appearance Uniform solid particles Note Sample available upon request 2. Typical Specifications Analysis Item Unit Typical Value Intrinsic Viscosity dl/g 0.807 End Carboxyl Content mol/t 17.6 Diethylene Glycol Content % 4.28 Color Value (L,b) – 76.7/7.2 Peak Melting Temperature (DSC) ℃ 206.95 3. Physical & Chemical Properties State: Solid particles at room temperature Solubility: Insoluble in water and common organic solvents Stability: Stable under normal processing conditions; hygroscopic Note: PEF is a 100% bio-based polyester resin derived from 2,5-furandicarboxylic acid, offering superior gas […]
- [TDS 6.2 of Bio-based Bright Low Melting PET Chip BIO-LM180](https://petchemical.com/tds-6-2-of-bio-based-bright-low-melting-pet-chip-bio-lm180/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio LM Br Chip (Bio-based Polyester Chip) BIO-LM180 Appearance Solid chips Note Sample available upon request 2. Typical Specifications (Based on Test Result) Analysis Item Unit Typical Value Intrinsic Viscosity dl/g 0.64 Melting Point ℃ 188 DEG (Diethylene Glycol) Content % 2.43 Color Value (L) – 52 Color Value (a) – -1.2 Color Value (b) – 2.5 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage
- [TDS 6.1 of Bio-based Semi-dull PET Chip for Filament BIO-PET-1](https://petchemical.com/tds-6-1-of-bio-based-semi-dull-pet-chip-for-filament-bio-pet-1/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bio-based PET Chip (Filament Grade, India Origin Bio-MEG)  BIO-PET-1 CAS No. 25038-59-9 Bio-Content 20% (derived from renewable Bio-MEG feedstock) Appearance Transparent solid chips 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity (IV) dl/g 0.65 ± 0.010 Melting Point ℃ ≥255 Diethylene Glycol (DEG) Content % 1.0 ± 0.1 Carboxyl End Group mol/t ≤40 Color (L value) – ≥74 Color (a value) – ≤-2 Color (b value) – ≤1.5 Moisture Content % ≤0.4 TiO₂ Content % 0.3 ± 0.01 3. Physical & Chemical Properties 4. Applications 5. Packaging & […]
- [TDS 5.3 of PET Chip with SiO₂ Masterbatch (Silica Modified PET) WW-20000](https://petchemical.com/tds-5-3-of-pet-chip-with-sio%e2%82%82-masterbatch-silica-modified-pet-ww-20000/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name PET Chip with SiO₂ (3.5 μm) WW-20000 CAS No. 25038-59-9 (PET) / 14808-60-7 (SiO₂) Appearance Transparent to semi-transparent solid chips 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity dl/g 0.650 ± 0.015 Melting Point ℃ ≥258.0 Color L Value – ≥65.00 Color b Value – 3.0 ± 3.0 SiO₂ Content (3.5 μm) ppm 20000 ± 200 Carboxyl End Groups mol/t ≤25.00 DEG Content % 1.10 ± 0.20 Water Content % ≤0.50 Strange State of Product % ≤0.50 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage […]
- [TDS 5.2 of PET Chip with SiO₂ Masterbatch (Silica Modified PET) WW-7000](https://petchemical.com/tds-5-2-of-pet-chip-with-sio%e2%82%82-masterbatch-silica-modified-pet-ww-7000/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name PET Chip with SiO₂ (3.5 μm)  Masterbatch   WW-7000 CAS No. 25038-59-9 (PET) / 14808-60-7 (SiO₂) Appearance Transparent to semi-transparent solid chips 2. Typical Specifications Analysis Item Unit Specification Intrinsic Viscosity dl/g 0.650 ± 0.015 Melting Point ℃ ≥258.0 Color L Value – ≥65.00 Color b Value – 3.0 ± 3.0 SiO₂ Content (2.0 μm) ppm 7000 ± 100 Carboxyl End Groups mol/t ≤25.00 DEG Content % 1.10 ± 0.20 Water Content % ≤0.50 Strange State of Product % ≤0.50 3. Physical & Chemical Properties 4. Applications 5. Packaging & […]
- [TDS 5.1 of Titanium Dioxide PET Master Batch Chip FTH-166A](https://petchemical.com/tds-5-1-of-titanium-dioxide-pet-master-batch-chip-fth-166a/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Titanium Dioxide Masterbatch (TiO₂ MB) Model FTH-166A Appearance Pellets 2. Typical Specifications Analysis Item Unit Specification TiO₂ Content % 20 ± 1 Melting Point ℃ 250 ± 5 Intrinsic Viscosity dl/g 0.52 ± 0.03 Filter Pressure Value (ΔP) bar/g ≤ 0.2 Weight/100 Chips g 3.1 ± 0.2 Moisture Content % ≤ 0.2 Apparent Color (L value) – 88 ± 0.4 Apparent Color (A value) – -1.2 ± 0.3 Apparent Color (B value) – -0.48 ± 0.3 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage
- [TDS 4.6 of Bio-based 2,5-Furandicarboxylic Acid (FDCA)](https://petchemical.com/tds-4-6-of-bio-based-25-furandicarboxylic-acid-fdca/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 2,5-Furandicarboxylic Acid (FDCA, Bio-based) CAS No. 3238-40-2 Molecular Formula C₆H₄O₅ Molecular Weight 156.09 g/mol Appearance White crystalline powder 2. Typical Specifications (per Hefei LIV specifications) Analysis Item Unit Specification Appearance / White crystalline powder Purity (by HPLC/GC) wt% ≥99.90 Moisture (Karl Fischer) wt% ≤0.10 Ash Content wt% ≤0.01 Melting Point ℃ ≥330 (decomposition) Acid Value mg KOH/g 715–730 Color (APHA, 10% in NaOH) Hazen ≤15 5-Hydroxymethylfurfural (HMF) ppm ≤10 Heavy Metals (as Pb) ppm ≤5 Total Organic Impurities wt% ≤0.10 3. Physical & Chemical Properties 4. Applications 5. Packaging […]
- [TDS 4.5 of Bio-based Propane-1,3-diol](https://petchemical.com/tds-4-5-of-bio-based-propane-13-diol/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 1,3-Propanediol (Bio-based) CAS No. 504-63-2 Molecular Formula C₃H₈O₂ Molecular Weight 76.10 g/mol Appearance Colorless, transparent liquid 2. Typical Specifications Analysis Item Unit Specification Appearance / Colorless, transparent liquid Purity wt% ≥99.5 Water Content (Karl Fischer) ppm ≤1000 Color (APHA) Hazen ≤15 Hydroxyl Value mg KOH/g 1470–1480 Density (20℃) g/cm³ 1.050–1.054 Viscosity (20℃) cP 50–55 Boiling Point (760 mmHg) ℃ 214 Freezing Point ℃ -24 Flash Point ℃ 129 3. Physical & Chemical Properties 4. Applications 5. Packaging & Storage
- [TDS 4.4 of Bio-based Azelaic acid](https://petchemical.com/tds-4-4-of-bio-based-azelaic-acid/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Azelaic Acid (Bio-based, PRIACID A95-FL-(SI)) CAS No. 123-99-9 Molecular Formula C₉H₁₆O₄ Molecular Weight 188.22 g/mol Appearance @25℃ Flake 2. Typical Specifications Analysis Item Unit Specification Appearance @25℃ / Flake Azelaic Acid % 95.00–100.00 Total Dibasic Acid % 99.00–100.00 Monobasic Acid % 0.00–0.05 Less than C9DC % 0.00–1.50 More than C9DC % 0.00–2.50 Acid Value mg KOH/g 575.0–595.0 APHA Color Hazen 0–300 Transmittance @440nm % 94–100 Transmittance @550nm % 97–100 3. Physical & Chemical Properties 4. Packaging & Storage
- [TDS 4.3 of Bio-based Sebacic acid](https://petchemical.com/tds-4-3-of-bio-based-sebacic-acid/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Sebacic Acid (Bio-based) CAS No. 111-20-6 Molecular Formula C₁₀H₁₈O₄ Molecular Weight 202.25 g/mol Appearance White granular 2. Typical Specifications Analysis Item Unit Specification Appearance / White granular Purity % Min. 99.5 Ash % Max. 0.03 Moisture % Max. 0.30 Color (APHA) Hazen Max. 10 Melting Point °C 131–134.5 3. Physical & Chemical Properties 4. Packaging & Storage
- [TDS 4.2 of Bio-based MEG](https://petchemical.com/tds-4-2-of-bio-based-meg/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Mono Ethylene Glycol (BIO MEG) CAS No. 107-21-1 Molecular Formula C₂H₆O₂ Molecular Weight 62.07 g/mol Appearance Colourless, transparent liquid with no suspended impurities Grade BIO MEG (Bio-based Mono Ethylene Glycol) 2. Typical Specifications Analysis Item Unit Specification Appearance / Colourless, transparent with no suspended impurities Odour / Odourless Colour (APHA) Hazen ≤5.0 Specific Gravity @20℃ / 1.1151–1.1156 MEG Content % ≥99.80 Moisture (w/w) % ≤0.060 DEG Content % ≤0.060 Acidity (as acetic acid) % ≤0.0010 Ash Content % ≤0.0010 UV Transmittance @220nm % ≥70.0 UV Transmittance @275nm % ≥95.0 […]
- [TDS 4.1 of Bio-PTA](https://petchemical.com/tds-4-1-of-bio-pta/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Pure Terephthalic Acid (Bio-based PTA) CAS No. 100-21-00 EINECS No. 2028300 Appearance White crystalline powder 2. Typical Specifications Analysis Item Unit Specification Acid No. mg KOH/g 675 ± 2 4-Carboxybenzaldehyde (4-CBA) ppm w/w Max 25 p-Toluic Acid (p-TA) ppm w/w 125 ± 45 Benzoic Acid ppm w/w Max 30.0 Metals (Al, Ca, Co, Cr, Fe, K, Mg, Mn, Mo, Na, Ni, Ti) ppm w/w Individual ≤1, Total ≤3 Water Content % w/w Max 0.15 Ash ppm w/w Max 6 Color in 2N KOH Solution (Hazen Units) Hazen Max 10 […]
- [TDS 3.29 of Tlac powder](https://petchemical.com/tds-3-29-of-tlac-powder/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Ultrafine Talcum Powder CAS No. 14807-96-6 Chemical Formula Mg₃Si₄O₁₀(OH)₂ Appearance White powder 2. Typical Specifications by Grade 2.1 YF-60-3000 Analysis Item Unit Specification Package / 15kg Paper Package Whiteness % ≥95 D50 μm 4 Loss on Ignition % ≤9 2.2 YF-3000 Analysis Item Unit Specification Package / 15kg Paper Package Whiteness % ≥98 D50 μm 4 Loss on Ignition % ≤6 2.3 YF-5000 Analysis Item Unit Specification Package / 12.5kg Paper Package Whiteness % ≥98 D50 μm 3.5 Loss on Ignition % ≤6 2.4 YF-10000 Analysis Item Unit Specification […]
- [TDS 3.28 of PEG 200-8000](https://petchemical.com/tds-3-28-of-peg-200-8000/): PRODUCT TECHNICAL DATA SHEET (TDS) 1. Product Identification Chemical Name: Polyethylene Glycol (PEG) CAS No.: 25322-68-3 EINECS No.: 500-038-2 Molecular Formula: HO(CH₂CH₂O)ₙH Alias: Polyoxyethylene, Polyethylene Oxide 2. Typical Technical Specifications (Industrial Grade, 25℃) General Standard: GB/T 16451-2017 Table 1 Item PEG-200 PEG-300 PEG-400 PEG-600 Appearance Colorless transparent liquid Colorless transparent liquid Colorless transparent liquid Colorless transparent liquid Color (Pt-Co) ≤20 ≤20 ≤20 ≤20 Hydroxyl Value (mgKOH/g) 510~623 340~416 255~312 170~208 Average Molecular Weight 180~220 270~330 360~440 540~660 Acid Value (mgKOH/g) ≤0.5 ≤0.5 ≤0.5 ≤0.5 Moisture Content (%) ≤1.0 ≤1.0 ≤1.0 ≤1.0 pH (5% Aqueous Solution) 5.0~7.0 5.0~7.0 5.0~7.0 5.0~7.0 Table […]
- [TDS 3.27 of Sodium Formate](https://petchemical.com/tds-3-27-of-sodium-formate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Sodium Formate Chemical Formula CHNaO₂ CAS No. 141-53-7 Molecular Weight 68.01 g/mol Grade Analytical Reagent (AR) Appearance Colorless crystal 2. Typical Specifications Analysis Item Unit Specification Characters / Colorless crystal Assay % ≥99.5 Appearance of Solution / Comply with the standard Water-insoluble Substances % ≤0.005 Chloride % ≤0.002 Sulphates % ≤0.005 Iron % ≤0.0005 Heavy Metal % ≤0.0005 3. Physical & Chemical Properties 4. Packaging & Storage
- [TDS 3.26 of Isosorbide](https://petchemical.com/tds-3-26-of-isosorbide/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Isosorbide (99.5% Grade) CAS No. 652-67-5 Molecular Formula C₆H₁₀O₄ Molecular Weight 146.14 g/mol Appearance White crystal 2. Typical Specifications Analysis Item Unit Specification Appearance / White crystal Melting Point ℃ 60–65 Clarity of Solution / Clear Loss on Drying % ≤1.0 Heavy Metal ppm ≤20 Residue on Ignition % ≤0.1 Purity (by GC) % ≥99.5 3. Physical & Chemical Properties 4. Packaging & Storage Handling Precautions: Avoid contact with skin and eyes; use appropriate PPE when handling.
- [TDS 3.25 of Triethyl phosphonoacetate](https://petchemical.com/tds-3-25-of-triethyl-phosphonoacetate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Triethyl Phosphonoacetate CAS No. 867-13-0 Molecular Formula C₈H₁₇O₅P Molecular Weight 224.19 g/mol Appearance Colorless transparent oily liquid 2. Typical Specifications Analysis Item Unit Specification Appearance / Colorless transparent oily liquid Purity (GC) wt% ≥99.0 Water Content wt% ≤0.20 Acid Number mgKOH/g ≤1.0 3. Physical & Chemical Properties 4. Packaging & Storage
- [TDS 3.24 of Oxalic Acid Dihydrate (Electronic grade)](https://petchemical.com/tds-3-24-of-oxalic-acid-dihydrate-electronic-grade/): 1. Product Identification Item Details Product Name Oxalic Acid Dihydrate (Electronic Grade) Chemical Formula C₂H₂O₄·2H₂O CAS No. 6153-56-6 Molecular Weight 126.07 g/mol Appearance Colorless crystals Grade Electronic Grade 2. Typical Specifications Analysis Item Unit Specification Appearance / Colorless crystals Purity (C₂H₂O₄·2H₂O) wt% ≥99.6 Chloride (Cl) wt% ≤0.0004 Sulfate (SO₄) wt% ≤0.002 Calcium (Ca) wt% ≤0.0001 Iron (Fe) wt% ≤0.0001 Sodium (Na) wt% ≤0.0001 Barium (Ba) wt% ≤0.0001 3. Physical & Chemical Properties Item Details State Colorless crystalline solid at room temperature Solubility Soluble in water, ethanol; slightly soluble in ether Stability Stable under normal conditions; incompatible with strong bases, strong […]
- [TDS 3.23 of 2,6-Naphthalene Dicarboxylic Acid (2,6-NDA)](https://petchemical.com/tds-3-23-of-26-naphthalene-dicarboxylic-acid-26-nda/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Purified 2,6-Naphthalene Dicarboxylic Acid (PNDA) CAS No. 1141-38-4 Molecular Formula C₁₂H₆O₄ Molecular Weight 218.17 g/mol Appearance White powder 2. Typical Specifications Analysis Item Unit Specification Test Method Organic Purity wt% >99.8 LC [MM-NDC + NDC] wt% <0.1 LC Color (b* value) – <8 Colorimeter Ash Content ppm <15 Combustion Nickel (Ni) ppm <2 ICP Iron (Fe) ppm <5 ICP Volatiles wt% <0.1 Moisture Balance Appearance / White powder Visual 3. Applications Purified 2,6-Naphthalene Dicarboxylic Acid (PNDA) is produced by the hydrolysis of dimethyl 2,6-naphthalene dicarboxylate (NDC). Polymers produced from […]
- [TDS 3.22 of Dimethyl 2,6-Naphthalene Dicarboxylate (2,6-NDC)](https://petchemical.com/tds-3-22-of-dimethyl-26-naphthalene-dicarboxylate-26-ndc/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Dimethyl 2,6-Naphthalene Dicarboxylate (NDC) CAS No. 840-65-3 Molecular Formula C₁₄H₁₂O₄ Molecular Weight 244.24 g/mol Appearance Flake / White crystalline solid 2. Typical Specifications Analysis Item Unit Specification Test Method Organic Purity wt% >99.95 HPLC Acid Number mg KOH/g <0.02 HPLC Color (APHA) – ≤50 Colorimeter/Melt Ash Content ppm <2 Combustion Foreign Particles (particles/g >1.5 microns) – <1200 Hiac Royco 3. Applications Dimethyl 2,6-Naphthalene Dicarboxylate (NDC) is a difunctional aromatic ester primarily used in the production of specialty polyester polymers. Incorporation of NDC into polyesters improves thermal barrier (both diffusional […]
- [TDS 3.21 of BPS-EO](https://petchemical.com/tds-3-21-of-bps-eo/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bisphenol S Bis(2-hydroxyethyl) Ether (BPS-EO) IUPAC Name Bis[4-(2-hydroxyethoxy)phenyl] sulfone CAS No. 27205-03-4 Molecular Formula C₁₆H₁₈O₆S Molecular Weight 338.38 g/mol Appearance White crystalline powder 2. Typical Specifications Analysis Item Unit Specification Test Method Purity % ≥97 HPLC (ISO 10993-17) Appearance / White crystalline powder Visual Inspection Melting Point °C 178–185 Differential Scanning Calorimetry (DSC) 3. Physical & Chemical Properties Item Details State White crystalline powder at room temperature Density (25°C) 1.32 g/cm³ Solubility Soluble in dimethylformamide (DMF), dimethyl sulfoxide (DMSO), ethylene glycol, and hot ethanol; slightly soluble in cold water […]
- [TDS 3.20 of BPA-EO](https://petchemical.com/tds-3-20-of-bpa-eo/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Bisphenol A Bis(2-hydroxyethyl) Ether (BPA-EO) IUPAC Name 2,2-Bis{4-[2-hydroxyethoxy]phenyl}propane CAS No. 901-44-0 Molecular Formula C₁₈H₂₂O₆ Molecular Weight 334.37 g/mol Appearance White crystalline powder 2. Typical Specifications Analysis Item Unit Specification Test Method Purity % ≥97 HPLC (ISO 10993-17) Appearance / White crystalline powder Visual Inspection Melting Point °C 110–115 Differential Scanning Calorimetry (DSC) 3. Physical & Chemical Properties Item Details State White crystalline powder at room temperature Density (25°C) 1.21 g/cm³ Solubility Soluble in dimethylformamide (DMF), ethylene glycol, propylene glycol, hot ethanol, and acetone; slightly soluble in cold water, insoluble […]
- [TDS 3.19 of Trimellitic Acid (TMAc)](https://petchemical.com/tds-3-19-of-trimellitic-acid-tmac/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Trimellitic Acid (TMAC) Chemical Formula C₉H₆O₆ Molecular Weight 210.14 g/mol CAS No. 528-44-9 Appearance White crystalline powder 2. Typical Specifications Analysis Item Unit Specification Test Standard Appearance / White crystalline powder Visual method Purity (Trimellitic Acid) % ≥98.0 GB/T 1645-2018 Moisture % ≤0.5 GB/T 6283-2024 Melting Point °C 228–232 GB/T 617-2021 Ash Content % ≤0.10 GB/T 7531-2018 Iron (Fe) ppm ≤20 GB/T 3049-2006 Heavy Metals (as Pb) ppm ≤20 GB/T 3049-2006 3. Physical & Chemical Properties Item Details Appearance White crystalline powder Density approx. 1.68 g/cm³ (20°C) Melting Point […]
- [TDS 3.18 of Trimethyl Trimellitate (TMTM)](https://petchemical.com/tds-3-18-of-trimethyl-trimellitate-tmtm/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Trimethyl Benzene-1,2,4-Tricarboxylate (TMTM) Chemical Formula C₁₂H₁₂O₆ Molecular Weight 252.22 g/mol CAS No. 2459-10-1 Appearance Colorless to light yellow liquid 2. Typical Specifications Analysis Item Test Method Unit Specification Typical Test Result Water Content ISO 760-78 / ASTM E203 % ≤ 0.200 0.012 Dimethylphthalate Content (All isomers) LAB-WI-12-04-586960-01 % ≤ 3.00 0.73 Free Methanol Content LAB-WI-12-04-586960-01 % ≤ 0.200 0.000 TMTM Content LAB-WI-12-04-586960-01 % ≥ 97.00 98.65 Colour (Gardner) ASTM D1544-80 Gardner ≤ 6.0 0.1 pH (Water extract) LAB-WI-12-04-586960-03 – 4.0 – 8.0 4.9 Acidity EN ISO 3682 / DIN […]
- [TDS 3.17 of PEPD](https://petchemical.com/tds-3-17-of-pepd/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 2-Butyl-2-Ethyl-1,3-Propanediol (BEPD) Chemical Formula C₉H₂₀O₂ Molecular Weight 160.25 g/mol CAS No. 115-84-4 Appearance Slightly yellow solid 2. Typical Specifications Analysis Item Unit Specification Typical Test Result Appearance – Slightly yellow solid Pass Color of molten material (APHA) Hazen ≤ 20 3 Purity % ≥ 99.0 ≥ 99.5 Melting Point °C ≥ 40 41.0 Free Acid (as formic acid) % ≤ 0.04 0.001 Water Content % ≤ 0.5 0.01 Hydroxyl Content % ≥ 20.5 21.2 3. Physical & Chemical Properties Item Details Appearance Slightly yellow solid Melting Point ≥ 40 […]
- [TDS 3.16 of HHPA](https://petchemical.com/tds-3-16-of-hhpa/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Hexahydrophthalic Anhydride (HHPA) Chemical Formula C₈H₁₀O₃ Molecular Weight 154.16 g/mol CAS No. 85-42-7 Appearance White solid 2. Typical Specifications (Company Standard Q/PHD002-2021) Analysis Item Unit Specification Typical Test Result Appearance – White Solid White Solid Color (Pt-Co, Hazen) – ≤ 50 15 Content (Purity) % ≥ 99.0 99.6 Freezing Point °C 34.0 – 38.0 36.6 Iodine Value Ig/100g ≤ 1.0 0.28 Free Acid % ≤ 1.0 0.16 3. Physical & Chemical Properties Item Details Appearance White solid Melting/Freezing Point 34.0 – 38.0 °C Boiling Point ~283 °C (at 101.3 […]
- [TDS 3.15 of Phthalic Anhydride(PA)](https://petchemical.com/tds-3-15-of-phthalic-anhydridepa/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Phthalic Anhydride (PA) Chemical Formula C₈H₄O₃ Molecular Weight 148.12 g/mol CAS No. 85-44-9 Appearance White flake or crystalline powder 2. Typical Specifications (1st Grade, GB/T 15336-2013) Analysis Item Unit Specification Typical Test Result Appearance – White flake or crystalline powder White flake Molten Color (Hazen) – ≤ 50 15 Heat Stable Color (Hazen) – ≤ 150 30 Purity (Mass Fraction) % ≥ 99.50 99.99 Free Acid (Mass Fraction) % ≤ 0.30 0.03 Crystallization Point °C ≥ 130.3 — Sulfuric Acid Color (Hazen) – ≤ 100 20 Maleic Anhydride Content […]
- [TDS 3.14 of 1-Hexanol](https://petchemical.com/tds-3-14-of-1-hexanol/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 1-Hexanol (1-Hexanol / n-Hexanol) Chemical Formula C₆H₁₃OH Molecular Weight 102.18 g/mol CAS No. 111-27-3 Appearance Colorless transparent liquid 2. Typical Specifications Analysis Item Unit Specification Typical Test Result Content (GC) % ≥ 99.00 99.32 Moisture wt% ≤ 0.10 0.02 Hydrocarbon Impurities % ≤ 1.00 Not detected Acid Value mg KOH/g ≤ 0.10 0.02 Hydroxyl Value mg KOH/g 540 – 550 543 Carbonyl Value µg/g ≤ 200 23.14 Color (Hazen) – ≤ 10 5 Density (20 °C, d₄²⁰) g/cm³ 0.810 – 0.830 0.820 3. Physical & Chemical Properties Item Details […]
- [TDS 3.13 of 1,6-Hexanediol](https://petchemical.com/tds-3-13-of-16-hexanediol/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 1,6-Hexanediol CAS No. 629-11-8 Molecular Formula C₆H₁₄O₂ Molecular Weight 118.17 g/mol Appearance White solid at room temperature 2. Typical Specifications Analysis Item Unit Standard Specification Typical Test Result Appearance – White solid at room temperature White solid at room temperature Purity (1,6-Hexanediol) % ≥ 99.5 99.71 Moisture (By KF) % ≤ 0.3 0.24 Color (Pt-Co) at 60℃ Hazen < 15 1 Acid Number mgKOH/g ≤ 0.1 0.01 Every Other Impurity % ≤ 0.3 0.15 Total Impurities % ≤ 0.5 0.29 3. Physical & Chemical Properties Item Details Melting Point […]
- [TDS 3.12 of Epsilon-Caprolactone（ECL）](https://petchemical.com/tds-3-12-of-epsilon-caprolactone%ef%bc%88ecl%ef%bc%89/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name ε-Caprolactone (Epsilon-Caprolactone Monomer) CAS No. 502-44-3 Molecular Formula C₆H₁₀O₂ Molecular Weight 114.14 g/mol Appearance Colorless transparent liquid, no visible impurities 2. Typical Specifications Analysis Item Unit Standard Specification Typical Test Result Appearance – Colorless transparent liquid, no visible impurities Colorless transparent liquid, no visible impurities Purity % ≥ 99.90 99.96 Color (Hazen) Hazen ≤ 10 5 Water Content % ≤ 0.050 0.010 Acidity mgKOH/g ≤ 0.30 0.16 3. Physical & Chemical Properties Item Details Melting Point -1 °C Boiling Point 215–216 °C Flash Point (closed cup) 109 °C Density […]
- [TDS 3.11 of Benzyl AlcoholC](https://petchemical.com/tds-3-11-of-benzyl-alcoholc/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Benzyl Alcohol CAS No. 100-51-6 Molecular Formula C₇H₈O Molecular Weight 108.14 g/mol Appearance Clear, colourless, oily liquid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – Clear, colourless, oily liquid Clear, colourless, oily liquid Purity % ≥ 99.9 99.97 Specific Gravity (20℃) kg/m³ 1042–1047 1045 Refractive Index (20℃) – 1.538–1.541 1.540 Benzaldehyde % ≤ 0.07 0.01 Benzyl Chloride % ≤ 0.005 0.001 Color (Hz) Hz ≤ 10 5 Acid Value mgKOH/g ≤ 0.5 0.1 Clarity of Solution (1+30) – Clear Passed Moisture % ≤ 0.1 0.02 […]
- [TDS 3.10 of Trimethylolpropane（TMP）](https://petchemical.com/tds-3-10-of-trimethylolpropane%ef%bc%88tmp%ef%bc%89/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Trimethylolpropane (TMP) CAS No. 77-99-6 Molecular Formula C₆H₁₄O₃ Molecular Weight 134.17 g/mol Appearance White flake or tiny coloured crystal 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White flake or tiny coloured crystal White flake / crystalline solid Purity % ≥ 98.5 99.4 Hydroxyl Value % ≥ 37.5 37.85 Acidity (as formic acid) % ≤ 0.002 0.002 Moisture % ≤ 0.05 0.045 Ash Content % ≤ 0.005 0.002 Melting Point ℃ 56–59 57.8–58.6 Color (Pt-Co/APHA) – ≤ 10 5 3. Physical & Chemical Properties Item […]
- [TDS 3.9 of 1,4-Cyclohexanedimethanol （CHDM)](https://petchemical.com/tds-3-9-of-14-cyclohexanedimethanol-%ef%bc%88chdm/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 1,4-Cyclohexanedimethanol (CHDM) CAS No. 105-08-8 Molecular Formula C₈H₁₆O₂ Molecular Weight 144.21 g/mol Appearance White waxy solid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White waxy solid White waxy solid Purity % ≥ 99.0 99.9 Moisture wt% ≤ 0.1 0.02 Color APHA ≤ 10 3 Trans Isomer Ratio % 70 ± 3 67.6 CHDM Intermediates % ≤ 1.0 Trace High Boilers % ≤ 0.5 Trace 3. Physical & Chemical Properties Item Details Melting Point 41–61 ℃ Boiling Point 283 ℃ Flash Point 161 ℃ (closed […]
- [TDS 3.8 of Trimellitic Anhydride(TMA)](https://petchemical.com/tds-3-8-of-trimellitic-anhydridetma/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Trimellitic Anhydride (TMA) CAS No. 552-30-7 Molecular Formula C₉H₄O₅ Molecular Weight 194.13 g/mol Appearance White to light yellow flake or granular solid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White or light yellow flake/granular solid White flake solid Acid Value mgKOH/g ≥ 873.00 874.12 Anhydride Content % ≥ 98.00 98.88 Melting Point ℃ ≥ 164.0 165.6 Melt Color # ≤ 120 90 PA Content ppm ≤ 300 10 3. Physical & Chemical Properties Item Details Melting Point 164–168 ℃ Boiling Point 390 ℃ Flash […]
- [TDS 3.7 of Sodium 5-Sulfoisophthalic Acid (SSIPA)](https://petchemical.com/tds-3-7-of-sodium-5-sulfoisophthalic-acid-ssipa/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name 5-Sulfoisophthalic Acid Monosodium Salt (5-SSIPA) CAS No. 6362-79-4 Molecular Formula C₈H₅NaO₇S Molecular Weight 268.18 g/mol Appearance White Powder 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White powder Complies Assay (Purity) % ≥ 99.0 99.0 Moisture % ≤ 0.5 0.28 Acidity mg KOH/g 418 ± 3 417 Sulfate mg/kg ≤ 500 262 Iron (Fe) mg/kg ≤ 5 3.8 pH – 1.8 – 2.2 2.0 3. Physical & Chemical Properties Item Details Melting Point > 300 ℃ Solubility Soluble in water and polar solvents; slightly soluble […]
- [TDS 3.6 of Sodium Dimethyl 5-Sulfoisophthalate (DMS, SSIPM)](https://petchemical.com/tds-3-6-of-sodium-dimethyl-5-sulfoisophthalate-dms-ssipm/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Dimethyl-5-sulfoisophthalate Sodium Salt CAS No. 3965-55-7 Molecular Formula C₁₀H₉NaO₇S Molecular Weight 296.23 g/mol Appearance White Powder 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White powder White powder Color (APHA) – ≤ 15 < 10 Purity (GC) % ≥ 99.0 99.35 Moisture % ≤ 0.40 0.21 Acid Value mgKOH/g ≤ 0.50 0.32 Saponification Value mgKOH/g 375–381 378.60 Sulfate Ion ppm ≤ 100 ≤ 100 Fe (Ferrum) ppm ≤ 5 ≤ 4 Chloride Ion ppm ≤ 10 ≤ 10 Absorbance – ≤ 0.05 0.040 3. Physical […]
- [TDS 3.5 of Dimethyl Isophthalate](https://petchemical.com/tds-3-5-of-dimethyl-isophthalate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Dimethyl Isophthalate (DMIP) CAS No. 1459-93-4 Molecular Formula C₁₀H₁₀O₄ Molecular Weight 194 g/mol Appearance White Flake Solid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Appearance – White, flake solid White flake solid Color (APHA) – ≤ 15 < 10 Purity (GC) % ≥ 99.8 99.98 / 99.99 Moisture % ≤ 0.10 0.039 / 0.01 Acid Value mgKOH/g ≤ 0.10 0.063 / 0.04 3. Physical & Chemical Properties Item Details Melting Point ≥ 68 ℃ Boiling Point 156 ℃ @ 10 mmHg Flash Point (C.O.C.) 345 ℃ […]
- [TDS 3.4 of Trimethyl Phosphate](https://petchemical.com/tds-3-4-of-trimethyl-phosphate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Trimethyl Phosphate (TMP) CAS No. 512-56-1 Molecular Formula (CH₃)₃PO₄ Appearance Colorless, Transparent Liquid Boiling Range 193–197℃ 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Assay (GC) % ≥ 99 99.58 Color (APHA) – ≤ 10 ≤ 10 Moisture wt% ≤ 0.09 0.08 Chlorinity ppm ≤ 0.2 ≤ 0.2 Acid Value (Before Heat Treatment) mgKOH/g ≤ 0.2 0.12 Acid Value (After Heat Treatment) mgKOH/g ≤ 1.5 1.03 Penetration Rate (Before Heat Treatment, T-300) % ≥ 90 96 Penetration Rate (After Heat Treatment, T-300) % ≥ 88 92 3. […]
- [TDS 3.3 of Triethyl Phosphate](https://petchemical.com/tds-3-3-of-triethyl-phosphate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Triethyl Phosphate (TEP) CAS No. 78-40-0 Molecular Formula (C₂H₅)₃PO₄ Appearance Colorless Transparent Liquid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result Assay (Purity) % ≥ 99.50 99.79 Acidity mgKOH/g ≤ 0.05 0.032 Water Content % ≤ 0.2 0.047 Hazen Color Value (Pt-Co) – ≤ 20 10 Refractive Index (20℃) – 1.405–1.407 1.4062 Density (20℃) g/cm³ 1.069–1.073 1.071 3. Physical & Chemical Properties Item Details Appearance Colorless transparent liquid Solubility Miscible with water and most organic solvents Stability Stable under normal conditions 4. Applications 5. Packaging & Storage […]
- [TDS 3.2 of sebacic acid (petro-based )](https://petchemical.com/tds-3-2-of-sebacic-acid-petro-based/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Sebacic Acid CAS No. 111-20-6 Molecular Formula HOOC(CH₂)₈COOH Molecular Weight 202 g/mol Appearance White Granule 2. Typical Specifications (DC10SG Grade) Analysis Item Unit Standard Typical Test Result Sebacic Acid Content % ≥ 99.5 99.9 Melting Point ℃ 131–135 131.2–134.8 Water Content % ≤ 0.3 0.1 Ash ppm ≤ 30 17 Iron (Fe) ppm ≤ 3 2 Total Nitrogen ppm ≤ 50 42 Color / Transmittance (440nm/550nm) % ≥ 96 / 98 99.8 / 99.9 Thermal Stability (440nm/550nm) % ≥ 90 / 95 97.7 / 99.4 Hazen Color (Pt-Co) – […]
- [TDS 3.1 of Titanium Dioxide (Fiber grade)](https://petchemical.com/tds-3-1-of-titanium-dioxide-fiber-grade/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name SUNTIOX SA-50 (Anatase Titanium Dioxide) CAS No. 13463-67-7 Appearance White Powder 2. Typical Specifications Analysis Item Unit Specification Test Result Crystal Structure – Anatase Anatase Specific Gravity g/cm³ – 3.9 TiO₂ Content % ≥ 98.0 99.4 Sieve Residue (325 Mesh) % ≤ 0.004 0.001 Moisture (105℃) % ≤ 0.40 0.21 Fe₂O₃ % ≤ 0.004 0.004 pH Value – 6.8 ± 0.2 6.7 Electrical Conductivity (EC) µs/cm ≤ 230 158 Specific Surface Area (SSA) m²/g 8.5–10.0 9.1 Color Value L – 96.7–98.2 97.1 Color Value b – ≤ 0.0 -0.4 […]
- [TDS 2.12 of Titanium-Based Polyester Catalyst LY-20](https://petchemical.com/tds-2-12-of-titanium-based-polyester-catalyst-ly-20/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Titanium-Based Polyester Catalyst (LY-20) Product Type Titanium Metal Complex Aqueous Solution CAS No. N/A Appearance Colorless to Pale Yellow Liquid 2. Typical Specifications Analysis Item Unit Specification Titanium Content % 5.0 ± 0.2 Density (20℃) g/cm³ 1.2–1.4 Solid Content % 35–55 pH Value (10% Solution) – < 2 3. Physical & Chemical Properties 4. Applications 5. Handling & Process Recommendations 6. Safety, Storage & Packaging 7. Supply & Support Capability Item Capability Annual Production Capacity 500 MT/year Safety Stock 30 days Delivery Lead Time 10 days from order confirmation […]
- [TDS 2.11 of Tetrabutyl Titanate (TNBT)](https://petchemical.com/tds-2-11-of-tetrabutyl-titanate-tnbt/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Tetra-n-butyl Titanate (TnBT, Tyzor® TnBT) Chemical Formula Ti(OC₄H₉)₄ Molecular Weight 340 g/mol CAS No. 5593-70-4 Appearance Colorless to pale yellow liquid 2. Typical Specifications Analysis Item Unit Typical Value TiO₂ Content % ca. 23.5 Active Content % ca. 100 Density (20℃) g/mL ca. 0.99 Freezing Point ℃ ca. -70 Boiling Point (@10 mmHg) ℃ ca. 183 Flash Point ℃ ca. 47 3. Physical & Chemical Properties Item Details Appearance Colorless to pale yellow liquid Solubility in Solvents Miscible in most organic solvents Solubility in Water Decomposes quickly Stability Highly […]
- [TDS 2.9 of Cobalt Acetate Anhydrous](https://petchemical.com/tds-2-9-of-cobalt-acetate-anhydrous/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Anhydrous Cobalt Acetate Chemical Formula Co(CH₃COO)₂ Molecular Weight 177.02 g/mol CAS No. 71-48-7 Appearance Purple crystalline powder 2. Typical Specifications   Analysis Item Unit Specification Typical Test Result Cobalt (Co) Content % ≥ 32.0 32.5 Iron (Fe) % ≤ 0.001 0.0004 Nickel (Ni) % ≤ 0.08 0.0006 Copper (Cu) % ≤ 0.003 0.0002 Magnesium (Mg) % ≤ 0.003 0.0005 Sodium + Potassium (Na+K) % ≤ 0.03 0.01 Manganese (Mn) % ≤ 0.005 0.02 Sulfate (SO₄²⁻) % ≤ 0.02 0.003 Calcium (Ca) % ≤ 0.001 0.0005 Chloride (Cl⁻) % ≤ […]
- [TDS 2.10 of Lithium Acetate Dihydrate](https://petchemical.com/tds-2-10-of-lithium-acetate-dihydrate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Lithium Acetate Dihydrate Chemical Formula CH₃COOLi·2H₂O Molecular Weight 102.02 g/mol CAS No. 6108-17-4 Appearance White crystalline solid 2. Typical Specifications Analysis Item Unit Standard Typical Test Result LiAc·2H₂O Purity % ≥ 99.0 99.65 Sodium (Na) % ≤ 0.05 0.0041 Potassium (K) % ≤ 0.05 0.0005 Iron (Fe) % ≤ 0.002 0.0001 Calcium (Ca) % ≤ 0.01 0.0014 Sulfate (SO₄²⁻) % ≤ 0.02 0.0045 Chloride (Cl⁻) % ≤ 0.01 0.0053 Copper (Cu) % ≤ 0.02 0.0001 Water Insoluble Matter % ≤ 0.01 0.0005 Heavy Metals (as Pb) % ≤ 0.01 […]
- [TDS 2.8 of Cobalt Acetate Tetrahydrate](https://petchemical.com/tds-2-8-of-cobalt-acetate-tetrahydrate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Cobalt Acetate Tetrahydrate Chemical Formula Co(CH₃COO)₂·4H₂O Molecular Weight 249.08 g/mol CAS No. 6147-53-1 Appearance Reddish-pink crystalline solid 2. Typical Specifications (Q/FSJ1 07-2018) Analysis Item Unit Specification Typical Test Result Total Purity % ≥ 99.0 99.8 Cobalt (Co) Content % ≥ 23.5 23.6 Iron (Fe) % ≤ 0.005 0.0002 Lead (Pb) % ≤ 0.002 0.0001 Copper (Cu) % ≤ 0.0005 0.0001 Chloride (Cl⁻) % ≤ 0.005 0.0005 Sulfate (SO₄²⁻) % ≤ 0.005 0.0005 Water Insoluble Matter % ≤ 0.01 0.001 3. Physical & Chemical Properties Item Details Appearance Reddish-pink crystalline […]
- [TDS 2.7 of Sodium Acetate Anhydrous](https://petchemical.com/tds-2-7-of-sodium-acetate-anhydrous/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Anhydrous Sodium Acetate Chemical Formula CH₃COONa Molecular Weight 82.02 g/mol CAS No. 127-09-3 Appearance White powder, soluble in water 2. Typical Specifications Analysis Item Unit Specification (Analytical Grade) Typical Test Result Content (CH₃COONa) % ≥ 99.0 99.3 pH (50 g/L, 25 °C) – 7.5 ~ 9.0 8.2 Clarity Test No. ≤ 3 ≤ 3 Water Insoluble Substances % ≤ 0.005 0.003 Chloride (Cl⁻) % ≤ 0.002 0.001 Sulfate (SO₄²⁻) % ≤ 0.003 0.001 Phosphate (PO₄³⁻) % ≤ 0.0005 < 0.0005 Magnesium (Mg) % ≤ 0.0005 < 0.0005 Aluminum (Al) […]
- [TDS 2.6 of Sodium Acetate Trihydrate](https://petchemical.com/tds-2-6-of-sodium-acetate-trihydrate/): Sodium Acetate Trihydrate – Analytical Reagent 1. Product Identification Item Details Product Name：Sodium Acetate Trihydrate (Analytical Reagent) CAS No.：6131-90-4 Molecular Formula：CH₃COONa·3H₂O Appearance：Colourless transparent crystal or white granular solid Application：Chemical analysis buffer preparation, laboratory reagent, water treatment carbon source, organic synthesis auxiliary, culture medium raw material 2. Typical Specifications Item Unit Value Assay (CH₃COONa·3H₂O) % ≥99.0 pH (50g/L, 25℃) – 7.5–9.0 Water Insoluble Substances % ≤0.002 Chloride (Cl) % ≤0.001 Sulfate (SO₄) % ≤0.005 Iron (Fe) % ≤0.0002 Heavy Metals (Pb) % ≤0.0005 Melting Point ℃ 58 Solubility (20℃) g/L ≥760 3. Key Features Compliant with GB/T 693-2024 national standard for […]
- [TDS 2.5 of Zinc Acetate Dihydrate](https://petchemical.com/tds-2-5-of-zinc-acetate-dihydrate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Zinc Acetate Dihydrate Chemical Formula Zn(CH₃COO)₂·2H₂O Molecular Weight 219.50 g/mol CAS No. 5970-45-6 Appearance White fine crystalline solid 2. Typical Specifications (HG 3-1098-77) Analysis Item Unit Specification Typical Test Result Assay (Purity) % (w/w) ≥ 99.0 99.57 Clarity Test Hazen ≤ 4 < 4 pH (5g/100mL) – 6.0–6.7 6.40 Water Insoluble Matter % (w/w) ≤ 0.003 0.002 Chloride (Cl⁻) % (w/w) ≤ 0.001 < 0.001 Sulfate (SO₄²⁻) % (w/w) ≤ 0.002 < 0.002 Iron (Fe) % (w/w) ≤ 0.0002 < 0.0002 Arsenic (As) % (w/w) ≤ 0.00002 < 0.00002 […]
- [TDS 2.4 of Magnesium Acetate Tetrahydrate](https://petchemical.com/tds-2-4-of-magnesium-acetate-tetrahydrate/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Magnesium Acetate Tetrahydrate Chemical Formula Mg(CH₃COO)₂·4H₂O Molecular Weight 214.45 g/mol CAS No. 16674-78-5 Appearance White crystalline solid 2. Typical Specifications (HG/T 5726-2020) Analysis Item Unit Specification Typical Test Result Assay (Purity) % (w/w) ≥ 99.0 99.60 Clarity Test Hazen ≤ 3 < 3 Water Insoluble Matter % (w/w) ≤ 0.005 0.002 Chloride (Cl⁻) % (w/w) ≤ 0.005 < 0.0005 Sulfate (SO₄²⁻) % (w/w) ≤ 0.005 < 0.005 Phosphate (PO₄³⁻) % (w/w) ≤ 0.001 < 0.001 Sodium (Na) % (w/w) ≤ 0.005 < 0.005 Potassium (K) % (w/w) ≤ 0.005 […]
- [TDS 2.3 of Monobutyltin Oxide](https://petchemical.com/tds-2-3-of-monobutyltin-oxide/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Monobutyltin Oxide (MBTO) Chemical Formula C₄H₁₀O₂Sn / BuSnOOH Molecular Weight 208.8 g/mol CAS No. 2273-43-0 Appearance White powder 2. Typical Specifications Analysis Item Unit Specification Typical Test Result Tin Content (Sn) % 56.5 ± 0.5 56.3 Chlorine Content (Cl) % ≤ 1.0 0.7 Volatility (Loss on Drying) % ≤ 1.0 0.7   3. Physical & Chemical Properties Item Details Appearance White powder Melting Point Decomposes at high temperature (no melting) Solubility Insoluble in water and most organic solvents; soluble only in strong alkalis and mineral acids Stability Stable under […]
- [TDS 2.2 of Germanium Dioxide](https://petchemical.com/tds-2-2-of-germanium-dioxide-2/): PRODUCT DATA SHEET (TDS) 1. Product Identification Item Details Product Name Germanium Dioxide (GeO₂) Chemical Formula GeO₂ Molecular Weight 104.59 g/mol CAS No. 1310-53-8 Appearance White crystalline powder 2. Typical Specifications (5N Grade) Analysis Item Unit Specification Purity (GeO₂) % ≥ 99.999 Gravimetric Assay (Ge) % 69.4 Total Metal Impurities % < 0.001 Iron (Fe) ppm ≤ 1.0 Copper (Cu) ppm ≤ 0.2 Nickel (Ni) ppm ≤ 0.2 Lead (Pb) ppm ≤ 0.1 Cobalt (Co) ppm ≤ 0.2 Aluminum (Al) ppm ≤ 1.0 Arsenic (As) ppm ≤ 0.5 Chloride (Cl) % ≤ 0.05 Particle Size – 95% ≥ 200 mesh […]
- [TDS 2.2 of Germanium Dioxide](https://petchemical.com/tds-2-2-of-germanium-dioxide/)
- [TDS 2.1 of Antimony Triethylene Glycolate](https://petchemical.com/tds-2-1-of-antimony-triethylene-glycolate/)

## Optional

- [Agent (MCP protocol)](websites-agents.hostinger.com/petchemical.com/mcp)

[comment]: # (Generated by Hostinger Tools Plugin)